Assembly standard of reverse osmosis purified water equipment 

Purified water is the water that everyone will drink, so we will introduce the reverse osmosis purified water equipment. In short, the reverse osmosis purified water equipment is the coagulation and sedimentation equipment for producing purified water. And purified water is widely used by us for drinking, chemical, medical, breeding, cultivation, food, drink, etc.

Equipment standard for reverse osmosis purified water coagulation sedimentation equipment

❀ Water yield: 0.25T-100T/H

❀ Raw water requirements: tap water

❀ Water supply form: automatic continuous water supply

❀ Effluent water quality standard: based on the national GB/1734-2003 standard, the conductivity is ≤ 10US.

❀ Voltage requirements: general power, grounding resistance 10W

❀ The water tank must be equipped with anhydrous maintenance facilities: in the process of purified water essence, an automatic setting and control RO system shall be set to automatically seal the water pump when water is cut off or anhydrous.

❀ Automatic water supply control: when the water level in the pure water tank exceeds the elevation control position, the controller automatically closes the water tank for water supply, and can automatically supply water from the beginning.

❀ Power off maintenance equipment: when the equipment fails during operation, the coagulation sedimentation equipment can automatically detect and close the corresponding power supply to avoid accidents.

❀ High/low pressure protection: when the water supply pressure is too high or too low, the equipment can automatically close the RO system.