Adjustable long handle filter head 

Product Introduction

Adjustable length range: 400mm-450mm, inner diameter of filter head handle: 25mm, outer diameter of filter head handle: 30mm

Length Range

The ABS adjustable filter head is composed of embedded seat, filter rod and filter cap. The filter rod is equipped with adjusting thread, which can be adjusted up and down; In addition, the adjusting flap is combined with the anti stripping strip of the adjusting flap in the embedded seat to control the adjustment accuracy of the filter rod and fix its position at the same time.

Process size of ABS adjustable filter head: for the adjustable filter head used in this project, the gap coefficient of filter cap is 36; The gap height is 34mm; Gap width: 0.4 mm; The total gap area is 4.90cm2.

The technological dimensions of the filter rod are: the length of the filter rod is 380 mm, the adjustable height is 70 mm, the up and down adjustments are 50 mm, and a height of 20 mm is reserved for the adjustment of uneven settlement of the foundation during the long-term operation of the filter tank in the future; Inner diameter 25 mm, strip hole area 66 mm2; The diameter of the small hole is 2.5 mm, and the length of the embedded seat is 150 mm.