Reverse osmosis reducing agent 

[Performance Description]

Before the raw water enters the reverse osmosis equipment for pretreatment, the incoming water usually needs to be chlorinated to prevent the growth of microorganisms. However, the residual chlorine will irreversibly oxidize and destroy the reverse osmosis membrane. The chlorine component in this product can quickly decompose the residual chlorine and protect the film from oxidation. It is used to remove the residual chlorine and combined chlorine in the influent of the membrane system.

Technical Indicators

Appearance: colorless transparent liquid

Solubility: soluble in water, slightly soluble in alcohol

Forbidden compound: strong oxidant, strong acid, strong base

Use Requirements

(1) It is strictly prohibited to add insufficient amount or interrupt dosing due to metering pump failure.

(2) The dosage depends on the amount of chlorine gas. Generally, 2ppm of residual chlorine shall be diluted with demineralized water or other soft water to remove 1ppm of residual chlorine. The diluent with the maximum dilution concentration of 20% must be used up within one week, because oxygen will make the product invalid.

[Precautions for operation]

Wear latex gloves, protective glasses and protective clothing. In case of splashing eyes, wash eyes with plenty of water immediately and seek medical advice quickly. Avoid spilling on the cement floor to avoid corrosion. If the floor is eroded, please wash it with clean water immediately.